A. Why silicone mold will appear burning mode phenomenon?
　　Because unsaturated resin and the resin product plus a peroxide curing agent after the reaction resin case will generate a lot of heat, general resin curing time of 3 minutes, so 3 minutes to release as soon as possible, we will not be able to prevent the silicone mold produce burning mode phenomenon.
 
　　B. Why silicone mold will appear in the table dry quit phenomenon?
　　Silicone mold belongs condensation silicone, it is by absorbing moisture from the air and cured silicone in the process of making, the water evaporated, while not transferred amount of water, this phenomenon occurs . Solution: This phenomenon does not belong to product quality issues, but because there is no control of water, lifting silicone shelf life, shelf life for a long time to appear these phenomena, as long as when using silica gel, adding an appropriate amount of 0.05% of water, stir it you can solve some of the situation.
 
　　C. Why silicone mold will appear less turning model number?
　　Mold in the production process of adding too much silicone oil, silicone oil destroyed the molecular weight of the silica, so the mold will be turning model of fewer non-durable and so on. If the products do little more complex pattern of products, with a large open-hardness silica occurs turning model of fewer phenomenon, because the silicone perfect time will be very brittle, easily broken. Conversely, if you do build products with a small hardness silicone mold to do, the result will also be unsatisfactory. Because the silicone is too soft, it will reduce the tensile and tear strength, made out of the mold will be deformed, so turning model number will be reduced. Plastic mold itself are very good quality, silicone not good or bad, only the fit and do not fit. We want to use for the size of the product hardness silicone to make the mold will not appear the situation.