Transparent silicone materials may also be called and molding silicone molds, molded silicone only added to achieve transparent, condensation can only be translucent silicone. Transparent silicone raw materials, mainly 1: 1, 10: 1, is a two component, wherein the component is a platinum-containing curing agent.
　　Two-component transparent silicone in the operation should be noted:
　　This silicone not shared with any other condensation-type silicone contact, not with any as comprising contacting an organic compound, Sn, Pb, Rg, Bi, As and other ionic compounds N, P, S, etc., may cause a curing agent poisoning, resulting in a curing agent poisoning , resulting in the phenomenon of silicone will not cure
Long-term use in the temperature range of -65 ° C to 200 ° C and maintained under its soft elastic properties, electric properties and chemical stability, water resistance, ozone resistance to weathering, non-corrosive, physiologically inert, non-toxic and tasteless , low shrinkage line.
　　A, B component 1: 0.95-1.05 mixed evenly, the vacuum deaeration watering can, operating time, depending on temperature (0.5-3) H, vulcanization time (room temperature) 12-24H, heated 80-120 ° C can be cured in a few of minutes. Quick-drying operation time is less than room temperature 20 minutes cure time was one hour.
　　Two-component transparent silicone is widely used, Kam silica plant in addition to the two-component transparent silicone, there are many other silicone products, welcome to inquire.